Lexmark MS415
Troubleshooting. Print quality. Shadow images check
| Actions | Yes | No |
|---|---|---|
| Step 1 Does the shadow image appear every two pages? |
Go to step 2. | Go to step 3. |
| Step 2 Check the redrive assembly for wear or damage. Is it free of wear or damage? |
Go to step 3. | Replace the redrive assembly. |
| Step 3 Check the transfer roll for surface contamination or excessive wear. Is it free of contamination and wear? |
Go to step 4. | Replace the transfer roll |
| Step 4 Check the following fuser components for wear or damage: • Gears • Exit rollers • Belt fuser Are they free of damage? |
Go to step 5. | Replace the fuser. |
| Step 5 a Turn off the printer. b Remove the rear door and cover. c Disconnect the fuser cable connected to PCN5 of the power supply. d Check for approximate correct resistance on the fuser cable: • 220 V fuser—43 ohms • 110 V fuser—10 ohms • 100 V fuser—8 ohms Is the resistance equal to any of the above values? |
The problem is solved. | Replace the fuser. |