Lexmark CX317dn

Use the alignment menu to align the image on the page for cyan, yellow, and magenta. The black image should be aligned using REGISTRATION before the individual colors are aligned.

Warning—Potential Damage: Read the instructions for the alignment carefully.

Setting alignment for color

1. From the Diagnostics menu, touch Alignment Menu.
2. Select CYAN, YELLOW, or MAGENTA.
3. Touch Quick Test. You may need to scroll to the next page. A two-page instruction sheet prints. The printer prints the test page from the default paper source, however if the default source only supports envelopes, then the page prints from Tray 1. Print on A4 or letter paper for the best results.
4. Determine which settings to change and follow the instructions on the printed sheets to determine the adjustment.

   Description	Range
   Top Margin	-128 to +127
   Left Margin	-1200 to +1200
   Right Margin	-1200 to +1200
   Skew	-50 to +50
   Bow	-50 to +50
   Linearity	Linearity has a separate Quick Test sheet and adjustment instructions.

5. Touch (-) to decrease the value or (+) to increase the value. After the value appears, touch to save the value or Back to cancel.
6. Reprint the Quick Test to evaluate the changes. Continue until each adjustment is correct.
7. Repeat steps 4 through 6 as needed.
8. Continue until all three colors are aligned. A separate Quick Test prints for each color.
9. Touch Back to exit the Alignment Menu