Lexmark 7016-630 MX610de
Troubleshooting. Print quality. Toner rubs off
| Actions | Yes | No |
|---|---|---|
| Step 1 Check if the fuser screws are tightly fastened. Are they tightly fastened? |
Go to step 2. | Tighten the screws. |
| Step 2 a Turn off the printer. b Remove the rear door and cover. c Disconnect the fuser cable connected to PCN5 of the power supply. d Check for approximate correct resistance on the fuser cable: • 220V fuser—43 ohms • 110V fuser—10 ohms • 100V fuser—8 ohms Is the resistance equal to any of the above values? |
Go to step 3. | Replace the fuser |
| Step 3 Check the following fuser components for wear or damage: • Gears • Exit rollers • Belt fuser Are they free of damage? |
Replace the power supply | Replace the fuser. |