Lexmark 4064-210 MS821n
Service menus. Service Engineer menu
Entering the Service Engineer (SE) menu
To access the Service Engineer (SE) menu:
- Turn on the printer.
- When the home screen appears, press * * 411 on the control panel.
General SE Menu
- Capture Logs to USB Drive
Note: This setting allows you to save a log file to a USB drive. - Code Versions
- Debug Level
Network SE Menu
Enter the SE menu, and then select Network SE Menu.
Note: Use these settings as directed by the next level of support.
| Top‑level menu | Intermediate menu |
|---|---|
| HISTORY | • Print History • Mark History |
| MAC | • Set Card Speed • LAA • Keep Alive |
| NPAP | Print Alerts |
| TCP/IP | • DHCP Request Options • netstat • arp • Allow SNMP Set • MTU • Meditech Mode • RAW LPR Mode • Garp Interval |
| Wireless Settings | • Wireless Performance Enhancement • Unset Wireless Region |
| Ping Test | • Ping Address • Attempts • Packet Size • Ping |
| Other Actions | • ifconfig • IPtables [Firewall Dump] • IP6tables [Firewall Dump] • IPsec Dump |
| Enable DHCPCD Debugging | N/A |
| Enable wpa.supplicant Debugging | N/A |
| Enable Ethernet Gigabit | N/A |