Lexmark 4064-210 MS821n

Display Log

This setting displays the panel text that appears when the event occurs.
Enter the Diagnostics menu, and then navigate to:
Event Log > Display Log
For non-touch-screen printer models, press [OK] to navigate through the settings.

Print Log

This setting lists an extended version of the various printer events.

1. Enter the Diagnostics menu, and then navigate to:
   Event Log > Print Log
   For non-touch-screen printer models, press [OK] to navigate through the settings.
2. Press [OK] or touch Start.

Note: The events that appear in the report vary depending on the operational history of the printer.

Print Log Summary

This setting lists a brief summary of the various printer events.

1. Enter the Diagnostics menu, and then navigate to:
   Event Log > Print Log Summary
   For non-touch-screen printer models, press [OK] to navigate through the settings.
2. Press [OK] or touch Start.

Note: The events that appear in the report vary depending on the operational history of the printer.

Mark Log

This setting allows you to create a service, maintenance, or custom log entry. Each log entry is added in the printer event log.

1. Enter the Diagnostics menu, and then navigate to:
   Event Log > Mark Log
   For non-touch-screen printer models, press [OK] to navigate through the settings.
2. Select a log that you want to create, and then press [OK] or touch Start.

Input tray quick print

This setting lets you print a single or continuous Quick Test page in either duplex or simplex mode.

1. Enter the Diagnostics menu, and then select Input tray quick print.
2. Select where you want to print the pages from.
3. Select whether to print a single or continuous test page, and then select Start.

Output bin quick feed

This setting allows you to send a single or continuous test page to a bin.
For non-touch-screen printer models, press [OK] to navigate through the settings.

1. Enter the Diagnostics menu, and then touch Output bin quick feed.
2. Select where you want to send the test page.
3. Select whether to send a single or continuous test page, and then touch Start.