Lexmark 4063-230

REPORTS

Menu Settings Page

This setting prints the Menu Settings Page. The report prints the Diagnostics Menu settings and their current values.

To print the menu settings page:
From the Diagnostics menu, navigate to EP Setup > Gap Adjust.

Installed Licenses

This setting prints a report that lists the currently installed licenses and the feature data of each license.

To print the menu settings page:
From the Diagnostics menu, navigate to EP Setup > Installed Licenses.

EVENT LOG

Display Log

This version of the Event log displays the panel text that appeared when the event occurred.
To view the Event log:

1. From the Diagnostics menu, navigate to: Event Log > Display Log
2. Press ◄ ► to view the entries.

Print Log

Additional diagnostic information is available when the event log is printed. The first page of the report shows the general device information.

The specific events that appear in the report vary depending on the operational history of the printer. Logs may be printed from the following events:

• Job accounting log failures
• NV reset failures
• NV mirror entries
• 9xx and 1xx (print engine) service error entries
• Programming error entries
• Maintenance count reset entries
• Clear log entries
• Paper jam entries
• Firmware update entries
• JFFS2 partition format entries
• USB setup pkt info entries
• Supply event entries

To print the Event log:
From the Diagnostics menu, navigate to Event Log > Print Log.

Clear Log

Use this to remove all the current information in the Event log. This affects both the viewed log and the printed log information.

To clear the event log:

1. From the Diagnostics menu, navigate to: Event Log > Clear Log
2. Choose any of the following:
   • Yes—To clear the Event log
   • No—To exit the Clear log menu

Exit Diags

Select this option to exit the Diagnostics menu. The printer performs a POR and restarts in normal mode.

This menu appears as a soft button at the bottom right corner of the panel. This is always accessible to the user from the main Diagnostics menu.