Kyocera TASKalfa 9003i

Execute the following maintenance modes after replacing the above maintenance kit.

Section	Mode No.	Maintenance item	MK-6725
Replacing settings	U119	Drum unit initial settings	○
	U140	Developer bias adjustment (AC Calib/Calibration)	○
	U127	Transfer counter clear (Crear)	○
Image adjustment	U464	ID correction operation setting (Calib)	○
	U412	Adjusting the uneven density (Normal Mode)	○
	U464	ID correction operation setting (Calib)	○
	U410	Adjusting the halftone automatically	○
Maintenance	U251	Maintenance counter clear (Clear)	○

Drum unit

Section	Mode No.	Maintenance item
Replacing settings	U119	Drum unit initial settings	○
	U140	Developer bias adjustment (AC Calib/Calibration)	○
Image adjustment	U464	ID correction operation setting (Calib)	○
	U412	Adjusting the uneven density (Normal Mode)	○
	U464	ID correction operation setting (Calib)	○
	U410	Adjusting the halftone automatically	○

Developer unit

Section	Mode No.	Maintenance item
Replacing settings	U140	Developer bias adjustment (AC Calib/Calibration)	○
Image adjustment	U464	ID correction operation setting (Calib)	○
	U410	Adjusting the halftone automatically	○

Transfer belt unit

Section	Mode No.	Maintenance item
Replacing settings	U127	Transfer counter clear (Crear)	○

Main charger roller unit

Section	Mode No.	Maintenance item
Replacing settings	U930	Checking/clearing the main charger roller counts	○
Image adjustment	U464	ID correction operation setting (Calib)	○
	U410	Adjusting the halftone automatically	○