-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Kyocera TASKalfa 8353ci
Troubleshooting. Abnormal Noise 2
5 Abnormal sound from the eject section
Step |
Check description |
Assumed cause |
Measures |
1 |
Cleaning and applying the grease |
The bushing or the gear is dirty or foreign objects are on them. |
Clean the bushing and the gear of the eject roller and apply grease to them. |
2 |
Cleaning and applying the grease |
The shaft is dirty or foreign objects are on it. |
Clean the shaft of the eject pulley and apply grease to it. |
3 |
Checking the upper/lower change guides |
The shaft is dirty or foreign objects are on it. |
Clean the shafts of the upper/ lower change guides and apply grease to them. |
6 Fan rotating sounds are noisy
Step |
Check description |
Assumed cause |
Measures |
1 |
Cleaning the fan motor |
The fan of the fan motor is dirty. |
Isolate the noisy fan motor by executing U037, and clean the fan. |
2 |
Replacing the fan motor |
The fan motor is faulty. |
Reattach the fan motor and reconnect the wire. Replace it if it is not fixed. |
7 Abnormal sound from the primary paper feed section
Frictional wear, smudges / foreign objects adhesion, attachment failure of the primary paper feed section
Step |
Check description |
Assumed cause |
Measures |
1 |
Checking the gear and the clutch |
The parts such as the gear or the clutch are not properly attached. |
Reattach the primary paper feed drive components such as the gear or the clutch if they are not properly attached. |
2 |
Cleaning and applying the grease |
The gear or the bushing is dirty or foreign objects are on them. |
Clean the primary paper feed drive components such as the gear or the bushing and apply the grease to them. |
3 |
Cleaning and applying the greas |
The shaft or the bushing is dirty or foreign objects are on them. |
Clean the shaft and the bushing of the paper feed pulley or the PF paper feed pulley, and apply grease to them. |
4 |
Checking the feed pulley |
The paper feed pulley surface is dirty or worn down. |
Clean the paper feed pulley or the PF paper feed pulley, and replace them if necessary |
8 Abnormal sound from the machine front side
Wear, dirtiness, foreign objects adhesion or attachment failure at the MP feed section
Step |
Check description |
Assumed cause |
Measures |
1 |
Checking the gear and the clutch |
The parts such as the gear or the clutch are not properly attached |
When the gears or the clutch in the MP paper feed drive section are not properly attached, reattach them. |
2 |
Cleaning and applying the grease |
The shaft or the bushing is dirty or foreign objects are on them. |
Clean the shaft and the bushing of the MP paper feed pulley and apply the grease to them. |
3 |
Checking the MP retard pulley |
The MP retard pulley surface is dirty or worn down. |
Clean the MP retard pulley surface and replace it if necessary. |
4 |
Checking the lift plate |
The lift plate is not properly attached. |
Reattach the lift base. |