Kyocera TASKalfa 5500i
Troubleshooting. Jam Codes: 0000 - 0503
*: Refer to figure for paper misfeed indication
| Code | Contents | Conditions | Jam location* |
|---|---|---|---|
| 0000 | Initial jam | The power is turned on when a sensor in the con- veying system is on. | - |
| 0100 | Secondary paper feed request time out | Secondary paper feed request given by the con- troller is unreachable. | - |
| 0101 | Waiting for process package to become ready | Process package won’t become ready. | - |
| 0102 | Waiting for toner package to become ready | Toner package won’t become ready. | - |
| 0103 | Waiting for the image-sustain- ing package to become ready | The image-sustaining package won’t become ready. | - |
| 0104 | Waiting for conveying pack- age to become ready | Conveying package won’t become ready. | - |
| 0106 | Paper feeding request for duplex printing time out | Paper feeding request for duplex printing given by the controller is unreachable. | - |
| 0107 | Waiting for fuser package to become ready | Fuser package won’t become ready. | - |
| 0108 | Waiting for option package to become ready | Option package won’t become ready. | - |
| 0110 | Paper conveying unit open | The paper conveying unit is opened during print- ing. | E |
| 0111 | Front cover open | The front cover is opened during printing. | - |
| 0112 | Duplex cover open | The duplex cover is opened during printing. | F |
| 0113 | Paper conveying cover open | The paper conveying cover is opened during printing. | E |
| 0114 | Bridge cover open | The bridge cover is opened during printing. | J |
| 0115 | Bridge eject cover open | The bridge eject cover is opened during printing. | J |
| 0131 | MP lift sensor upper limit detection | MP lift sensor 1 (DPLS1) does not turn on within specified time of the MP lift plate rising. | D |
| 0200 | Machine sequence error | A sequence error has caused. | - |
| 0210 | PF paper conveying cover open | The PF paper conveying cover is opened during printing. | E |
| 0213 | SD cover open | The SD cover is opened during printing. | L |
| 0300 | |||
| 0501 | No paper feed from cassette 1 | Feed sensor 1 (FS1) does not turn on during paper feed from cassette 1. | A |
| 0502 | No paper feed from cassette 2 | Feed sensor 2 (FS2) does not turn on during paper feed from cassette 2. | B |
| 0503 | No paper feed from cassette 3 | PF feed sensor 1 (PFFS1) does not turn on dur- ing paper feed from cassette 3 (paper feeder). | C |