Kyocera TASKalfa 406ci
Troubleshooting. Mechanical failure 2
7. "Add toner" indication does not disappear. (BK)
Failure point and check method | Corrective action |
---|---|
1. Check if the spiral of the toner container rotates. 2. Check if the toner supply vent opens by lever operation. |
Replace the toner container. |
Check if the roller of the developer unit rotates and developer clutch, etc. delivering drive are not damaged. | 1. Replace the developer unit. 2. Paper conveying drive unit. |
8. "Add toner" indication does not disappear. (C.M.Y)
Failure point and check method | Corrective action |
---|---|
1. Check if the spiral of the toner container rotates. 2. Check if the toner supply vent opens by lever operation. |
Replace the toner container. |
Check if the roller of the developer unit rotates and coupling, etc. delivering drive are not damaged. | 1. Replace the developer unit. 2. Replace the main drive unit. |
9. An abnormal sound is generated
Failure point and check method | Corrective action |
---|---|
Check if each roller, pulley and gear rotate smoothly. | Apply grease to the bushing and roller shaft. |
Check if the roller of the developer unit rotates. | Replace the developer unit if it is locked. |
Check if the cause is the primary transfer unit cleaning section or main unit drive section. | 1. Clean the cleaning section if it is clogged with toner. 2. Apply grease if the sliding noise heard from the side of the main unit side waste toner joint gear. |
Check the occurrence at the fuser unit. Printing. Or, in case the fuser motor rotates reversely to release the fuser pressure at power-up. | Check the meshing of the gears and reattach the fuser unit. Grease is applied to the gear related to the fuser drive fuser. |
Check if it occurs when the cassette lift motor works | Check if the cassette lift motor is securely attached and reattach it. |