Kyocera TASKalfa 406ci
Troubleshooting. Mechanical failure 1
1. No primary paper feed.
Failure point and check method | Corrective action |
---|---|
Check if the surface of the roller below is dirty with paper dust, etc. Pickup roller Paper feed roller MP paper feed roller |
Clean the roller surface with alcohol. |
Check if the roller below is deformed. Pickup roller Paper feed roller MP paper feed roller |
Check and replace if deformed. |
Feed unit mounting error. | Check and repair if failed. |
2. No secondary paper feed.
Failure point and check method | Corrective action |
---|---|
Check if the surface of the roller below is dirty with paper dust, etc. DP registration roller DP registration pulley |
Clean the roller surface with alcohol. |
Detaching and reattaching the duplex paper conveying unit. | Check and repair if failed. |
3. Skewed paper feed.
Failure point and check method | Corrective action |
---|---|
Poor attachment of the paper width guide in a cassette. | Check if the paper width guide is set at the correct position and repair |
4. Multiple sheets of paper are fed.
Failure point and check method | Corrective action |
---|---|
1. Check if there is extreme curl on paper. | If curled, replace paper. |
2. Paper is not loaded in the cassette correctly. | Load paper. |
3. Check if the retard pulley is worn. | Replace if worn out. |
5. Paper jam occurs.
Failure point and check method | Corrective action |
---|---|
Check if there is extreme curl on paper. | If curled, replace paper. |
Check if the registration roller contacts the registration pulley correctly. | Check and repair if failed. |
Extreme dirt or deformation of the heat roller and press roller. | Check and replace the fuser unit if failed. |