Kyocera TASKalfa 406ci
Troubleshooting. Electric problems 4
16. Paper feed clutch does not operate.
| Cause of trouble | Check method and remedy |
|---|---|
| 1. Wire failure or connection failure of the connector. | If the connector is not inserted enough, reconnect it. Or check the wire's continuity. Replace the wire if there is no continuity. Feed clutch to Engine PWB (YC13) Feed clutch to Engine PWB (YC19) |
| 2. Clutch is defective. | Replaces the feed drive unit. |
| 3. PWB is defective. | Replace the engine PWB. |
17. Registration clutch does not operate.
| Cause of trouble | Check method and remedy |
|---|---|
| 1. Wire failure or connection failure of the connector. | If the connector is not inserted enough, reconnect it. Or check the wire's continuity. Replace the wire if there is no continuity. Registration clutch to Engine PWB (YC13): 30ppm model Registration clutch to Engine PWB (YC19): 35/40ppm models |
| 2. Clutch is defective. | Replaces the feed drive unit. |
| 3. PWB is defective. | Replace the engine PWB. |
18. The duplex clutch does not operate.
| Cause of trouble | Check method and remedy |
|---|---|
| 1. Wire failure or connection failure of the connector. | If the connector is not inserted enough, reconnect it. Or check the wire's continuity. Replace the wire if there is no continuity. Duplex clutch to Engine PWB (YC13): 30ppm model Duplex clutch to Engine PWB (YC19): 35/40ppm model |
| 2. Defective is defective. | Replaces the feed drive unit. |
| 3. PWB is defective. | Replace the engine PWB. |
19. The BK developer clutch does not operate.
| Cause of trouble | Check method and remedy |
|---|---|
| 1. Wire failure or connection failure of the connector. | If the connector is not inserted enough, reconnect it. Or check the wire's continuity. Replace the wire if there is no continuity. BK developer clutch to Engine PWB (YC13): 30ppm model BK developer clutch to Engine PWB (YC18): 35/40ppm models |
| 2. Clutch is defective. | Replaces the feed drive unit. |
| 3. PWB is defective. | Replace the engine PWB. |
20. Middle clutch does not operate.
| Cause of trouble | Check method and remedy |
|---|---|
| 1. Wire failure or connection failure of the connector. | If the connector is not inserted enough, reconnect it. Or check the wire's continuity. Replace the wire if there is no continuity. Middle clutch to Engine PWB (YC13): 30ppm model Middle clutch to Engine PWB (YC19): 35/40ppm models |
| 2. Clutch is defective. | Replaces the feed drive unit. |
| 3. PWB is defective. | Replace the engine PWB. |