Kyocera TASKalfa 406ci
Troubleshooting. Electric problems 3
11. The transfer belt fan motor does not rotate.
Cause of trouble | Check method and remedy |
---|---|
1. Wire failure or connection failure of the connector. | If the connector is not inserted enough, reconnect it. Or check the wire's continuity. Replace the wire if there is no continuity. Transfer belt fan motor to Engine PWB (YC10): 30ppm model Transfer belt fan motor to Engine PWB (YC17): 35/40ppm models |
2. Motor is defective. | Replace the transfer belt fan motor. |
3. PWB is defective. | Replace the engine PWB. |
12. The steam removal fan motor does not rotate.
Cause of trouble | Check method and remedy |
---|---|
1. Wire failure or connection failure of the connector. | If the connector is not inserted enough, reconnect it. Or check the wire's continuity. Replace the wire if there is no continuity. Steam removal fan motor to Engine PWB (YC24): 30ppm model Steam removal fan motor to Engine PWB (YC31): 35/ 40ppm models |
2. Motor is defective. | Replace the steam removal fan motor. |
3. PWB is defective. | Replace the engine PWB. |
13. The controller fan motor does not rotate.
Cause of trouble | Check method and remedy |
---|---|
1. Wire failure or connection failure of the connector. | If the connector is not inserted enough, reconnect it. Or check the wire's continuity. Replace the wire if there is no continuity. Controller fan motor to Engine PWB (YC21): 30ppm model Controller fan motor to Engine PWB (YC4): 35/40ppm models |
2. Motor is defective. | Replace the controller fan motor. |
3. PWB is defective. | Replace the engine PWB. |
14. The PWB fan motor does not rotate.
Cause of trouble | Check method and remedy |
---|---|
1. Wire failure or connection failure of the connector. | If the connector is not inserted enough, reconnect it. Or check the wire's continuity. Replace the wire if there is no continuity. PWB fan motor to Engine PWB (YC34): 30ppm model PWB fan motor to Engine PWB (YC14): 35/40ppm models |
2. Motor is defective. | Replaces the PWB fan motor. |
3. PWB is defective. | Replace the engine PWB. |
15. The toner sucking fan motor does not rotate. *40 ppm model only
Cause of trouble | Check method and remedy |
---|---|
1. Wire failure or connection failure of the connector. | If the connector is not inserted enough, reconnect it. Or check the wire's continuity. Replace the wire if there is no continuity. Toner sucking fan motor to Engine PWB (YC17) |
2. Motor failure | Replace the toner sucking fan motor. |
3. PWB is defective. | Replace the engine PWB. |