Kyocera TASKalfa 406ci
Troubleshooting. Electric problems 2
6. Connected to the eject fan motor.
| Cause of trouble | Check method and remedy |
|---|---|
| 1. Wire failure or connection failure of the connector. | If the connector is not inserted enough, reconnect it. Or check the wire's continuity. Replace the wire if there is no continuity. Eject fan motor to Engine PWB (YC10): 30ppm model Eject fan motor to Engine PWB (YC17): 35/40ppm models |
| 2. Motor is defective. | Connected to the eject fan motor. |
| 3. PWB is defective. | Replace the engine PWB. |
7. Developer fan motor 1 does not rotate.
| Cause of trouble | Check method and remedy |
|---|---|
| 1. Wire failure or connection failure of the connector. | If the connector is not inserted enough, reconnect it. Or check the wire's continuity. Replace the wire if there is no continuity. Developer fan motor 1 to Engine PWB (YC21): 30ppm model Developer fan motor 1 to Engine PWB (YC4) 35/40ppm models |
| 2. Motor is defective. | Replace the developer fan motor 1. |
| 3. PWB is defective. | Replace the engine PWB. |
8. Developer fan motor 2 does not rotate.
| Cause of trouble | Check method and remedy |
|---|---|
| 1. Wire failure or connection failure of the connector. | If the connector is not inserted enough, reconnect it. Or check the wire's continuity. Replace the wire if there is no continuity. Developer fan motor 1 to Engine PWB (YC21): 30ppm model Developer fan motor 1 to Engine PWB (YC4) 35/40ppm models |
| 2. Motor is defective. | Replace the developer fan motor 2. |
| 3. PWB is defective. | Replace the engine PWB. |
9. Developer fan motor 3 does not rotate.
| Cause of trouble | Check method and remedy |
|---|---|
| 1. Wire failure or connection failure of the connector. | If the connector is not inserted enough, reconnect it. Or check the wire's continuity. Replace the wire if there is no continuity. Developer fan motor 3 to Engine PWB (YC10): 30ppm model Developer fan motor 3 to Engine PWB (YC17): 35/40ppm models |
| 2. Motor is defective. | Replace the developer fan motor 3. |
| 3. PWB is defective. | Replace the engine PWB. |
10. Developer fan motor 4 does not rotate.
| Cause of trouble | Check method and remedy |
|---|---|
| 1. Wire failure or connection failure of the connector. | If the connector is not inserted enough, reconnect it. Or check the wire's continuity. Replace the wire if there is no continuity. Developer fan motor 3 to Engine PWB (YC10): 30ppm model Developer fan motor 3 to Engine PWB (YC17): 35/40ppm models |
| 2. Motor is defective. | Replace the developer fan motor 4. |
| 3. PWB is defective. | Replace the engine PWB. |