Kyocera TASKalfa 3551ci
Troubleshooting. Mechanical problems 2
5. Paper jams.
| Causes/check procedures | Corrective measures |
|---|---|
| Check if the paper is excessively curled. | Change the paper. |
| Check if the contact between the right and left registration rollers is correct. | Check visually and remedy if necessary. |
| Check if the heat roller or press roller is extremely dirty or deformed. | Check visually and replace the fuser unit |
| Check if the contact between the PF feed roller 1, 2 and PF feed pulleys is correct. | Check visually and remedy if necessary. |
6. Toner drops on the paper conveying path.
| Causes/check procedures | Corrective measures |
|---|---|
| Check if the drum unit or developer unit is extremely dirty. | Clean the drum unit or developer unit. |
7. Abnormal noise is heard.
| Causes/check procedures | Corrective measures |
|---|---|
| Check if the rollers, pulleys and gears operate smoothly. | Grease the bushes and gears. |
| Check if the following clutches are installed correctly. Paper feed clutch 1, 2 Assist clutch 1, 2*1 Paper conveying clutch MP paper feed clutch Registration clutch*2 Middle clutch*2 Duplex clutch 1, 2*2 *1: 45 ppm/55 ppm model only *2: 30 ppm/35 ppm model only |
Check visually and remedy if necessary. |