-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Kyocera TASKalfa 3510i
Maintenance Mode. Modes List: U108 - U204
| Section |
Item No. |
Content of maintenance item |
Initial setting |
| High volt- age |
U108 |
Setting separation shift bias |
6 |
| U110 |
Checking the drum count |
0 |
| U111 |
Checking the drum drive time |
0 |
| U117 |
Checking the drum number |
- |
| U118 |
Displaying the drum history |
- |
| U127 |
Checking/clearing the transfer count |
0 |
| Developer |
U130 |
Initial setting for the developer |
- |
| U139 |
Displaying the temperature and humidity outside the machine |
- |
| U140 |
Setting developer bias |
170/2700/55/0 (1:120 V) |
| U147 |
Setting for toner applying operation |
Mode1 |
| U148 |
Setting drum refresh mode |
2 |
| U150 |
Checking sensors for toner |
- |
| U157 |
Checking the developer drive time |
0 |
| U158 |
Checking the developer count |
0 |
| Fuser |
U161 |
Setting the fuser control temperature |
120/170/180/190/1/1/170/100 |
| U167 |
Checking the fuser count |
0 |
| U198 |
Set Fuser Phase Control |
0 |
| U199 |
Displaying fuser heater temperature |
- |
| Operation panel and support equipment |
U200 |
Turning all LEDs on |
- |
| U201 |
Initializing the touch panel |
- |
| U202 |
Setting the KMAS host monitoring system |
- |
| U203 |
Checking DP operation |
- |
| U204 |
Setting the presence or absence of a key card or key counter |
Off/Coin Vender |