Kyocera TASKalfa 350ci
Maintenance. Maintenance kits
Main unit
Name | Name used in parts list | Qty | Part No. |
---|---|---|---|
MK-5155 | MK-5155/MAINTENANCE KIT | 1702NS8NL1 072NS8N1 |
|
(200,000 images) | DRUM UNIT DK-5140 | 4 | |
Developer unit (K) DV-5150 (K) | 1 | ||
Developer unit (Y) DV-5150 (Y) | 1 | ||
Developer unit (M) DV-5150 (M) | 1 | ||
Developer unit (C) DV-5150 (C) | 1 | ||
Primary transfer unit TR-5140 | 1 | ||
Secondary transfer roller unit | 1 | ||
Fuser unit FK-5150 | 1 | ||
Paper feed roller unit | 1 | ||
Retard roller | 1 |
For document processor
Name | Name used in parts list | Qty | Part No. |
---|---|---|---|
MK-3140 | MK-3140/MAINTENANCE KIT | 1702P60UN0 072P60UN |
|
(200,000 images) | DP separation pad | 1 | |
DP feed roller | 1 | ||
DP forwarding pulley | 1 |
Maintenance modes that need to run after replacing the above maintenance kit.
Replace the maintenance kit at every 200,000 images.
The message "Replace MK." appears at the replacement timing.
Reset the counter by executing maintenance mode U251 after replacing the maitenance kit.
Section | Mode Number | Maintenance item |
---|---|---|
Replacing settings | U251 | Maintenance counter clear (Clear) |