Kyocera TASKalfa 350ci
Firmware. 1 Update
Perform the following to update the firmware below.
| Target firmware name | Master file name | Message |
|---|---|---|
| Controller firmware | DL_CTRL.2PC | CTRL |
| First color table data | DL_PCLT1.2NW | CLT1 |
| Second color table data | DL_PCLT2.2NW | CLT2 |
| FAX firmware | DL_FAX.2NM | Fax |
| Firmware for the first PF (paper feeder) | DL_03PK.2PC | PF1 |
| Firmware for the second PF (paper feeder) | PF2 | |
| Firmware for the third PF (paper feeder) | PF3 | |
| Engine firmware | DL_ENGN.2PC | ENGN |
| Optional language data | DL_OPT.2PC | OPT |
| Dictionary data | DL_DIC.2N4 | DIC |
| Browser data | DL_BRWS.2NM | BRWS |
| Panel data | DL_PANL.2PC | PANL |
Preparations
Unzip the file containing the downloaded firmware and then copy the firmware and high-speed master file (skip files: ES_SKIP.ON) in the root folder of the USB memory.
*: If the high-speed master file exists, the same version firmware update is skipped.
Procedures
- After turning the power switch on, the screen is properly displayed and then turn the power switch off.
- Insert the USB memory with the firmware into the USB memory slot.
- Turn the power switch on.
- "FW-UPDATE" and the progress indicator is displayed.
*: Several kinds of firmware updates are processed simultaneously. - "Completed" is displayed when the firmware update is completed.
- Check if the new firmware versions are displayed.
*: When there is no corresponding master file, "No Change" is displayed.
"*" is displayed after the firmware version update that has been skipped.
"----------"is displayed when the FAX PWB, the option equipment, etc. is not installed. - Unplug the power cord and disconnect the USB memory
- After plugging in the power cord, check that the "Home" screen is displayed and then turn the power switch off.
Never turn the power switch off or disconnect the USB memory during the firmware update.
If any errors appear during the firmware update (such as the file can not be read), the process is cancelled immediately and the completion message is displayed.
| Error code | Error content |
|---|---|
| 0100 | No Master file |
| 0200 | Version mismatch of the master file |
| 03xx | No Download File (No.xx) |
| 04xx | File (No.xx) Checksum mismatch |
| 05xx | File (No.xx) Preparation failure |
| 06xx | File (No.xx) Oversize |
| 08xx | File (No.xx) Writing failure |
| N001 | Network connection failed. (There is no upgrade target interrupted) |
| N002 | Network connection failed. (There is an upgrade target interrupted) |