Kyocera TASKalfa 3252ci

5. Abnormal noise from the eject section

Smudges / foreign objects adhesion in the eject section

Step	Check description	Assumed cause	Measures
1	Cleaning and applying the grease	The bushing or the gear is dirty or foreign objects are on them.	Clean the bushing and the gear of the eject roller and apply grease to them.
2	Cleaning and applying the grease	The shaft is dirty or foreign objects are on it.	Clean the shaft of the eject pulley and apply grease to it.
3	Checking the shaft of the feedshift guide	The shaft is dirty or foreign objects are on it.	Clean the shaft of the feedshift guide and apply grease to it.

6. Fan rotating sounds are noisy.

Step	Check description	Assumed cause	Measures
1	Cleaning the fan motor	The blades of the fan motor are dirty.	Isolate the noisy fan motor by executing U037, and clean the fan.
2	Replacing the fan motor	The fan motor is faulty.	Reattach the fan motor and reconnect the wire. Replace it if it is not fixed.

7. Abnormal noise from the primary paper feed section

Frictional wear, smudges / foreign objects adhesion, attachment failure of the primary paper feed section

Step	Check description	Assumed cause	Measures
1	Checking the gear and the clutch	The parts such as the gear or the clutch are not properly attached.	Reattach the primary paper feed drive components such as the gear or the clutch if they are not properly attached.
2	Cleaning and applying the grease	The gear or the bushing is dirty or foreign objects are on them.	Clean the primary paper feed drive components such as the gear or the bushing and apply the grease to them.
3	Cleaning and applying the grease	The shaft or the bushing is dirty or foreign objects are on them.	Clean the shaft and the bushing of the paper feed roller and apply the grease to them.
4	Checking the paper feed roller	The paper feed roller surface is dirty or worn down.	Clean the paper feed roller, or replace it if necessary.

8. Abnormal noise from the machine front side

Wear, dirtiness, foreign objects adhesion or attachment failure at the MP feed section

Step	Check description	Assumed cause	Measures
1	Checking the gear and the clutch	The parts such as the gear or the clutch are not properly attached.	When the gears or the clutch in the MP paper feed drive section are not properly attached, reattach them.
2	Cleaning and applying the grease	The shaft or the bushing is dirty or foreign objects are on them.	Clean the shaft and the bushing of the MP paper feed roller and apply the grease to them.
3	Checking the MP bottom pad	The MP bottom pad surface is dirty or worn down.	Clean the MP bottom pad and replace it if necessary.
4	Checking the MP bottom plate	The MP bottom plate is not properly attached.	Reattach the MP bottom plate.