Kyocera TASKalfa 308ci
Troubleshooting. Error messages
(1) The add paper message appears while the paper is loaded on the MP tray
Step | Description | Assumed cause | Measures |
---|---|---|---|
1 | Checking the connection | The connector is not connected properly Or wires are faulty. | Clean the connector terminal of the wire and re-insert them If there is no conductivity, replace the wire. MP paper sensor - Relay connector, Relay connector - Engine PWB |
2 | Replacing the actuator | The actuator is deformed | Replace the actuator of MP paper sensor |
3 | Checking the MP paper sensor | The MP paper sensor is not attached properly or is faulty | Reattach the MP paper sensor If not resolved, replace it |
4 | Replacing the Engine PWB | The engine PWB is faulty | Replace the engine PWB |