Kyocera TASKalfa 308ci

(5) Abnormal sound from the exit section

Smudges / foreign substances adhesion in the exit section

Step	Description	Assumed cause	Measures
1	Cleaning and applying the grease	The bushing or the gear is dirty or foreign substances are on them	Clean the bushing and the gear of the exit roller, and apply the grease on them (Name: EM-50LP, Part#: 7BG010009H)
2	Cleaning and applying the grease	The shaft is dirty or the foreign substances are adhered	Clean the reverse guide and the shaft of the exit feed-shift guide If the dirt or the foreign substances are not removed, replace them
3	Checking the exit motor	The exit motor is faulty	Execute U030 [Exit] If the abnormal noise occurs, replace the exit reverse motor

(6) Fan rotating sounds are noisy

Step	Description	Assumed cause	Measures
1	Cleaning the fan motor	The fan is dirty	Execute U037 and specify the fan motor that the rotation sound is large, and clean the fan
2	Replacing the fan	The fan is faulty	Reattach the fan motor and re-insert the connector If not resolved, replace it

(7) Noise from paper feed section

Wear, dirt, foreign material of paper feed section or failure to attach

Step	Description	Assumed cause	Measures
1	Checking the gear and the clutch	The gear or the clutch is not attached properly	If the gear or the clutch, etc. of the paper feed drive section is not attached properly, reattach them
2	Cleaning and applying the grease	The gear or the bushing, etc. are dirty or the foreign substances are adhered	Clean the gear and the bushing of the paper feed drive section, and apply the grease on them (Name: EM-50LP, Part#: 7BG010009H)
3	Cleaning and applying the grease	The gear or the bushing, etc. are dirty or the foreign substances are adhered	Clean the paper feed roller shaft and bushing, and apply the grease on them (Name: EM-50LP, Part#: 7BG010009H)

(8) Abnormal sound from the MP feeding section

Worn out of the MP paper feed section, dirt, foreign substances adhesion, or the failure to attach

Step	Description	Assumed cause	Measures
1	Checking the gear and the clutch	The gear or the clutch is not attached properly	If the gear or the clutch, etc. at the MP paper feed drive section are not attached properly, reattach them
2	Cleaning and applying the grease	The gear or the bushing, etc. are dirty or the foreign substances are adhered	Clean the MP paper feed roller shaft and bushing, etc., and apply the grease on them (Name: EM-50LP, Part#: 7BG010009H).
3	Checking the MP friction pad	The surface of the MP friction pad is dirty or worn out	Clean the MP friction pad and replace it if necessary
4	Checking the MP lift plate	The MP lift plate is not attached properly	Reattach the MP lift plate