Kyocera TASKalfa 2554ci
Malfunction. 2. The MP tray paper size is mis-detected
Step | Check description | Assumed cause | Measures |
---|---|---|---|
1 | Checking the sub tray | Sub tray is not in the proper position. | Pull out the sub tray to the position where you can see the triangle mark. Or, store it completely inside the MP frame. |
2 | Checking the connection | The connector is not connected properly, or the wire is faulty. | Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire.
|
3 | Checking the MP paper width sensor | MP Paper width sensor does not operate correctly. | Check the home position of the MP paper width sensor, and reattach it if necessary. Then, replace the sensor if it is not fixed. |
4 | Checking the MP paper length sensor | MP Paper length sensor does not operate correctly. | Reattach the MP paper length sensor. If not repaired, replace it. |
5 | Replacing the feed drive PWB | The feed drive PWB is faulty. | Replace the feed drive PWB. |
6 | Checking the engine PWB | The engine PWB is faulty. | Replace the engine PWB. |