Kyocera TASKalfa 2200
Troubleshooting. Mechanical problems 1
1. No primary paper feed.
| Causes/check procedures | Corrective measures |
|---|---|
| Check if the surfaces of the following rollers are dirty with paper powder. Pickup roller Paper feed roller MP paper feed roller |
Clean with isopropyl alcohol. |
| Check if the following rollers is deformed. Pickup roller Paper feed roller MP paper feed roller |
Check visually and replace any deformed |
| Defective paper feed clutch or MP solenoid installation. | Check visually and remedy if necessary. |
2. No secondary paper feed.
| Causes/check procedures | Corrective measures |
|---|---|
| Check if the surfaces of the following rollers are dirty with paper powder. Right registration roller Left registration roller |
Clean with isopropyl alcohol. |
| Defective registration clutch installation. | Check visually and remedy if necessary. |
3. Skewed paper feed.
| Causes/check procedures | Corrective measures |
|---|---|
| Paper width guide in a cassette installed incorrectly. | Check the paper width guide visually and remedy or replace if necessary. |
4. Multiple sheets of paper are fed.
| Causes/check procedures | Corrective measures |
|---|---|
| Check if the paper is excessively curled. | Change the paper. |
| Paper is loaded incorrectly. | Load the paper correctly. |
| Check if the separation pulley is worn. | Replace the separation pulley if it is worn |