Kyocera TASKalfa 181
Maintenance Mode. Item List: U000 - U099
*Initial setting for executing U020, *1: The item initialized for executing U020, *2: The item initialized for executing U021
Section | Item No. | Content of maintenance item | Initial setting* |
---|---|---|---|
General | U000 | Outputting an own-status report | - |
U001 | Exiting the maintenance mode | - | |
U002 | Setting the factory default data | - | |
U003 | Setting the service telephone number | ****************1,*2 | |
U004 | Displaying the machine number | - | |
U005 | Copying without paper | - | |
U019 | Displaying the ROM version | - | |
Initialization | U020 | Initializing all data | - |
U021 | Initializing counters and mode settings | - | |
U022 | Initializing backup memory | - | |
U026 | Evacuation of backup data | - | |
U027 | Return of backup data | - | |
Drive, paper feed, paper conveying and cooling system | U030 | Checking motor operation | - |
U031 | Checking switches for paper conveying | - | |
U032 | Checking clutch operation | - | |
U034 | Adjusting the print start timing Adjusting the leading edge registration Adjusting the center line Adjusting the trailing edge registration |
2.8/0.0/0.0/0.0/0.0/0.8*1 -2.4/0.0/0.0/0.0/0.0/0.0*1 2.0*1 |
|
U035 | Setting the printing area for folio paper Length/Width | 330/210*1 | |
U051 | Adjusting the deflection in the paper | 30/20/0/-20/-20/20*1 | |
U053 | Setting the adjustment of the motor speed | 0.3/0.7/-0.5/0.0/-0.1 -0.1/-0.3/0.0/0.0/0.5/0.0*1 |
|
Optical | U060 | Adjusting the scanner input properties | 12*1 |
U061 | Turning the exposure lamp on | - | |
U063 | Adjusting the shading position | 0*1 | |
U065 | Adjusting the scanner magnification Main scanning direction/auxiliary scanning direction |
0/-10*1 | |
U066 | Adjusting the scanner leading edge registration | 0/0*1 | |
U067 | Adjusting the scanner center line | -4/0*1 | |
U068 | Adjusting the scanning position for originals from the DP | 0*1 | |
U070 | Adjusting the DP magnification | 0/0*1 | |
U071 | Adjusting the DP scanning timing | 0/0/0/0*1 | |
U072 | Adjusting the DP center line | 0/0/0*1 | |
U073 | Checking scanner operation | - | |
U074 | Adjusting the DP input light luminosity | 0*1 | |
U076 | Executing DP automatic adjustment | - | |
U087 | Setting DP reading position modification operation | ON/35*1 | |
U089 | Outputting a MIP-PG pattern | - | |
U092 | Adjusting the scanner automatically | - | |
U093 | Setting the exposure density gradient Text and photo/Text/Photo |
0/0/0/2/3*1 |
|
U099 | Adjusting original size detection | 170/30/240*1 |