Kyocera ECOSYS P6130cdn
Service Mode. Drum, LSU
Drum
Description
Rotates the drum approximately 2 minutes with toner lightly on the overall drum. The cleaning blade in the drum unit scrapes toner off the drum surface to clean it.
Purpose
To clean the drum surface when image failure occurs due to the drum. This mode is effective when dew condensation on the drum occurs.
Method
1.Enter the Service Setting menu.
2.Using the [▲] [▼] keys, select [Drum refreshing].
3.Press the [OK] key.
4.By the left selection key, select [Yes]. Drum refreshing will be executed.
Completion
By the right selection key, select [Exit].
LSU
Description
The LSU cleaning motor drives the cleaning pad to wipe the LSU dust shield glass.
Purpose
To perform when the image failure occurs and stripes are seen in the vertical direction
Method
1.Enter the Service Setting menu.
2.Using the [▲] [▼] keys, select [Laser scanner cleaning].
3.Press the [OK] key.
4.By the left selection key, select [Yes]. Laser scanner cleaning will be executed.
Completion
By the right selection key, select [Exit].