Kyocera ECOSYS P6130cdn

Description

Counter reset for the maintenance kit The [Install MK] message means that maintenance kit should be replaced at fixed pages of printing. Reset the counter by using this service item after replacing the maintenance kit.
* :This is displayed on the system menu, only when the maintenance kit becomes at the time to replace.

Maintenance kit MK-5141 (30 ppm model) :200,000 images
Maintenance kit includes the following units
Drum unit
Developer unit(K,Y,M,C)
Primary transfer unit
Secondary transfer roller unit
Fuser unit
Paper feed roller unit
Retard roller

Purpose

Counter reset for the maintenance kit.

Replacement procedures

Drum unit
Developer unit(K,Y,M,C)
Primary transfer unit
Secondary transfer roller unit
Fuser unit
Paper feed roller unit
Retard roller unit

Method

1. Enter the Service Setting menu.
2. Using the [▲] [▼] keys, select [Maintenance]
3. Press the [OK] key.
4. Press the [OK] key. (30 ppm model) Select [Yes]. (By the left selection key, select [Yes].) (35 ppm model)
5. [Completed] is displayed. The counter for each component is reset immediately.

Remarks

Occurrences of resetting the maintenance kits are recorded on the service status page or event log in number of pages or number of images at which the maintenance kit was replaced. This may be used to determine the possibility that the counter was erroneously or unintentionally reset.