Kyocera ECOSYS P6030cdn
Troubleshooting. Electric problems 3
Problem | Causes | Check procedures/corrective measures |
---|---|---|
(12)A paper jam in the paper feed section, paper conveying section, fuser section or duplex section is indicated when the power switch is turned on. | A piece of paper torn from copy paper is caught around registration switch, duplex conveying sensor or paper exit sensor. | Check and remove if any. |
Defective registration sensor or duplex conveying sensor. | Replace the registration sensor or duplex conveying sensor. | |
Defective paper exit sensor. | Replace the paper exit PWB. | |
Defective engine PWB. | Replace the engine PWB | |
(13)The message requesting front cover to be closed is displayed when the front cover is closed. | Defective harness or improper connector insertion. | Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Front cover open/close switch - Paper exit PWB (YC5) Paper exit PWB (YC1) - Engine PWB (YC20) |
Defective front cover open/ close switch. | Replace the front cover open/close switch. | |
Defective paper exit PWB. | Replace the paper exit PWB. | |
Defective engine PWB. | Replace the engine PWB | |
(14)The message requesting cover to be closed is displayed when the top cover is closed. | Defective harness or improper connector insertion. | Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Interlock switch - Engine PWB (YC13) |
Defective interlock switch. | Replace the interlock switch. | |
Defective engine PWB. | Replace the engine PWB | |
(15)The message requesting left cover to be closed is displayed when the left cover is closed. | Defective harness or improper connector insertion. | Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Left cover switch - Engine PWB (YC14) |
Defective left cover switch. | Replace the left cover switch. | |
Defective engine PWB. | Replace the engine PWB | |
(16)Defective waste toner box detecting. | Defective harness or improper connector insertion. | Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Waste toner full sensor - Engine PWB (YC12) |
Defective waste toner full sensor. | Replace the waste toner full sensor. | |
Defective engine PWB. | Replace the engine PWB | |
(17)Others. | Wiring is broken, shorted or makes poor contact. | Check for continuity. If none, repair. |