Kyocera ECOSYS P5026cdw

J0107: Fuser temperature stabilization time-out

The fuser temperature does not achieve to the paper feed-able temperature within the specified time.

Step	Check description	Assumed cause	Measures
1	Resetting the main power	The controller does not activate normally.	Remove a piece of paper from each conveying section and check the sensors. Then, turn the power switch and the main power switch off. After 5s passes, turn the main power switch and the power switch on.
2	Checking the installation environment	The electric power supply fluctuates or the electric voltage reduces.	Plug the power cord into another wall outlet.
3	Checking the settings	The actual paper and the paper settings (media type, paper size) do not match.	Set the proper media type via the System Menu.
4	Firmware upgrade	The firmware does not correctly activate.	Upgrade the firmware to the latest version.
5	Checking the fuser unit	The fuser heater is faulty.	Replace the fuser unit.

J0110/J0111: cover open detection

The cover-open is detected during print.

Step	Check description	Assumed cause	Measures
1	Checking the cover	The covers are not fitted.	Check if the cover is securely closed, and reattach it if necessary. Repair or replace it if deformed.
2	Checking the cover switch	The cover switch is not correctly connected.	Reconnect the cover switch.
3	Checking the cover switch	The cover switch does not operate normally.	Reattach the cover switch if it is off.
4	Replacing the cover switch	The cover switch is faulty.	Replace the cover switch.

J0211: PF rear cover open detection

The PF rear cover open is detected while printing when paper feeds from cassette 2.

Step	Check description	Assumed cause	Measures
1	Checking the PF rear cover	The PF right cover is not aligned to the other exterior covers.	Check if the PF right cover is securely closed, and reattach it if necessary. If the PF right cover is deformed, repair or replace it.
2	Checking the PF rear cover switch	The PF rear cover switch is not correctly connected.	Reconnect the PF rear cover switch.
3	Checking the PF rear cover switch	The PF rear cover switch does not operate normally.	Reattach the PF rear cover switch if it is off.
4	Checking the PF rear cover switch	The PF rear cover switch does not operate normally	Replace the PF rear cover switch if it is faulty.