Kyocera ECOSYS P5026cdw
Service Mode. DEV-CLN, LSU, Drum
DEV-CLN
Description
The laser output of the image data, exposure, developing and middle transfer is executed for ten pages equivalent. (Paper is not fed)
Purpose
Execute when the image failure or problem in the developer unit occurs
Method
1.Enter the Service Setting menu.
2.Select [DEV-CLN].
3.Press the [OK] key.
4.Press the [OK] key.
5.Execute Developer Refresh.
Completion
Press the [Menu] key.
LSU
Contents
The cleaning pad is operated by the LSU cleaning motor and cleans the LSU dust-proof glass.
Purpose
Executes when the image failure of vertical lines appear.
Method
1.Enter the Service Setting menu.
2.Using the [▲] [▼] key, select [LSU].
3.Press the [OK] key.
4.Press the [OK] key.
5.Executes the laser scanner cleaning.
Completion
Press the [Menu] key.
Drum
Contents
Toner is thinly spread to the entire drum and it is rotated about 2 minutes. The cleaning blade inside the drum unit scrapes off toner to clean the drum surface.
Purpose
Cleans the drum surface if an image failure occurs from the drum factor. Effective to execute when condensation occurs on the drum.
Method
1.Enter the Service Setting menu.
2.Using the [▲] [▼] key, select [Drum].
3.Press the [OK] key.
4.Press the [OK] key.
5.Execute Drum refreshing.
Completion
Press the [Menu] key.