Kyocera ECOSYS P5026cdw

Contents

Reset the counter after replacing the maintenance kit.
The "Replace MK" message indicates that the print count has reached the pre-specified one and it is necessary to replace the maintenance kit. After replacing the maintenance kit, execute this item to reset the counter and to newly start the counter.
*: Appears in the system menu only at the time of replacement.

Purpose

Clears maintenance kit life counts.

Replacement procedures

Drum unit
Developer unit (K,C,M,Y)
Primary transfer unit
Secondary transfer roller assy
Fuser unit
Feed roller assy
Retard roller assy

Method

1. Enter the Service Setting menu.
2. Using the [▲] [▼] key, select [Maintenance].
3. Press the [OK] key.
4. Press the [OK] key.
5. "Completed" appears and the counter of the each unit is reset.

Remarks

The counter reset at the maintenance kit replacement is recorded in the event log as the page or image count at the maintenance kit replacement. Base on this information, it can be judged that it was reset at other timing than the maintenance kit replacement.