-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Kyocera ECOSYS P4060dn
Troubleshooting. Malfunction. 2. The MP tray paper size is misdetected
Step |
Check description |
Assumed cause |
Assumed cause |
1 |
Checking the sub tray |
Sub tray is not in the proper position. |
Pull out the sub tray to the position where you can see the triangle mark. Or, store it completely inside the MP frame. |
2 |
Checking the connection |
The connector is not connected properly, or the wire is faulty. |
Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. . Main unit - Paper conveying unit . MP paper length sensor - Feed drive PWB . MP paper width sensor - Feed drive PWB . Feed drive PWB - Engine PWB |
3 |
Checking the MP paper width sensor |
MP Paper width sensor does not operate correctly. |
Check the home position of the MP paper width sensor, and reattach it if necessary. Then, replace the sensor if it is not fixed. |
4 |
Checking the MP paper length sensor |
MP Paper length sensor does not operate correctly. |
Reattach the MP paper length sensor. If not repaired, replace it. |
5 |
Replacing the feed drive PWB |
The feed drive PWB is faulty. |
Replace the feed drive PWB. |
6 |
Replacing the engine PWB |
The engine PWB is faulty. |
Replace the engine PWB. |