Kyocera ECOSYS P4060dn
Maintenance Mode. Item List: U221 - U346
Classification | No. | Name of maintenance mode | Outline |
---|---|---|---|
U221 | USB host lock function setting | Set USB Host lock function ON/OFF | |
U222 | Setting the IC card type | Set the ID card type | |
U223 | Operation panel lock | Set On/Off of the operation unit lock function | |
U224 | Setting Original Panel Display | Set the opening screen | |
U230 | Optional device serial number | Display the serial number of the optional devices | |
U234 | Setting destination for punch | Set the destination of the punch unit | |
U237 | Finisher exit volume limit | Set the tray stack capacity | |
U240 | Finisher operation check | Check the drive operation | |
Operation section / Support equipment |
U241 | Finisher switch check | Check the switch operation |
U245 | Checking the message | Check message | |
U246 | Finisher adjustment | Set adjustment value of the finisher | |
U247 | Paper feed operation check | Drive the PF motor and clutch | |
U249 | Finisher line test | Execute the 4000-sheet finisher operation test | |
Mode Setting | U250 | Set Maintenance Counter Pre-set | Change the preset value |
U251 | clearing the maintenance counter | Display and clear/change the maintenance counter value. | |
U252 | Destination | Set the machine operation and display for each specification of the destination | |
U253 | Switching the double/single counts | Set the counting method by each color mode | |
U260 | Switching feed/exit count | Set the count-up timing | |
U265 | Setting by destination | Set the OEM code | |
U271 | Setting the page count unit | Set the counting unit of the long size paper | |
U278 | Delivery date setting | Register delivery date | |
U285 | Set Service Status Page | Set the print coverage report output | |
U286 | Optional language setting | Add/delete/change the optional language | |
U287 | Automatic recovery function | Set whether to make auto recovery function after the error | |
U323 | Abnormal temperature and humidity notification setting | Switch the display mode of the abnormal temperature and humidity detection | |
U325 | Paper interval setting | Sets the print interval at high coverage printing | |
U327 | Cassette heater control setting | Select the cassette heater control setting | |
U332 | Adjusting the black coverage coefficient | Set the coefficient of the custom size | |
U339 | Drum heater ON mode setting | Set the drum heater | |
U340 | Setting the applied mode | Set the memory allocation | |
U345 | Maintenance due timing display setting | Set the maintenance timing message display | |
U346 | Selecting Sleep Mode | Set the BAM related sleep mode |