Kyocera ECOSYS P4060dn
Maintenance Mode. Item List: U120 - U211
Classification | No. | Name of maintenance mode | Outline |
---|---|---|---|
U120 | Drum drive distance counter | Display the drum drive distance counter | |
U122 | Primary transfer unit number | Display the primary transfer unit number | |
U123 | Primary transfer unit history | Display the machine number and the primary transfer unit counter history | |
High voltage section | U127 | Clearing the transfer count | Display the transfer counter value |
U128 | Transfer timing adjustment | Adjust the transfer high-voltage output ON/OFF timing | |
Developer section | U131 | Toner sensor control voltage adjustment | Adjust the toner sensor control voltage |
U132 | Forcible toner supply operation | Execute the toner supply in the toner control level | |
U135 | Checking the toner motor operation | Drive the toner motor | |
U136 | Toner level detection setting | Set the number of pages printable at toner near end | |
U139 | Temperature, humidity | Display the machine inside and outside humidity | |
U140 | Developer bias adjustment | Adjust the developer bias values or set the high altitude mode. | |
U147 | Setting the toner applying mode | Set the overcharge toner removal mode | |
U148 | Drum refresh mode setting | Set auto drum refresh mode | |
U155 | Toner sensor output value | Display the toner sensor output | |
U156 | Toner control level adjustment | Display and adjust the toner empty level | |
U157 | Developer drive time | Display/set the developer drive time | |
U158 | Developer counter | Display/set the developer counter | |
U159 | Toner container function setting | Set the toner container lock and waste toner box | |
Fuser section | U161 | Fuser control temperature adjustment | Set the fuser control temperature |
U164 | Fuser unit history | Display the machine number and the fuser unit history | |
U165 | Fuser unit number | Display the fuser unit number | |
U167 | Clearing the fuser counter | Display/clear the counter value | |
U169 | Setting the fuser power source | Display/set the IH PWB control voltage | |
U197 | Setting Fuser Control | Set the fuser control | |
U193 | Fuser drive control setting | Set the fuser drive control setting | |
U199 | Fuser temperature | Monitor the fuser temperature | |
Operation section / Support equipment |
U200 | All LEDs lighting | Light all the LEDs on the operation panel |
U201 | Initializing the touch panel | Correct the X and Y axis position of the touch panel | |
U204 | Key card/key counter setting | Key card/key counter connection setting | |
U207 | Operation key check | Check the operation panel key operation | |
U208 | Setting the paper size for the side deck | Set paper size of side feeder | |
U211 | Enhancement unit connection setting | Set the connection of the enhancement devices |