Kyocera ECOSYS P3055dn
Service Mode. Service Items List 2
Event log
Printing an event log (EVENT LOG)
Description
Prints a history list of occurrences of paper jam, self-diagnostics, toner replacements, etc.
Purpose
To allow machine malfunction analysis based on the frequency of paper misfeeds, self diagnostic errors and replacements.
Method
1. Enter the Service Setting menu.
2. Select [Event Log] using the cursor up/down keys.
3. Press the OK key.
4. Select the [YES] using the left select key. [Accepted] is displayed and will be printed.
Maintenance
Counter reset for the maintenance kit
Description
The "Install MK" message means that maintenance kit should be replaced at fixed pages of printing. The interval counter must be manually reset using this service item.
Maintenance kit
MK-3160/3161/3162/3164 (45 ppm) :300,000 images
MK-3170/3191/3172/3174 (60/55/50 ppm) :500,000 images
Maintenance kit includes the following units:
Drum unit
Developer unit
Transfer roller assembly
Fuser unit
Paper feed roller assembly
Retard roller assembly
Purpose
To reset the life counter for maintenance kit.
Method
- Enter the Service Setting menu.
- Select [Maintenance] using the cursor up/down keys.
- Press the OK key.
- Select the [YES] using the left select key. [Completed] is displayed. The counter for each component is reset immediately.
Note:
Occurrences of resetting the maintenance kits are recorded on the service status page or event log in number of pages at which the maintenance kit was replaced. This may be used to determine the possibility that the counter was errorneously or unintentionally reset.