Kyocera ECOSYS P2135d
Troubleshooting. Mechanical problems
| Problem | Causes/check procedures | Corrective measures |
|---|---|---|
| (1) No primary paper feed. | Check if the surfaces of the paper feed roller is dirty with paper powder. | Clean with isopropyl alcohol. |
| Check if the paper feed roller is deformed. | Check visually and replace any deformed paper feed roller (assembly) | |
| Defective paper feed clutch installation. | Check visually and remedy if necessary. | |
| (2) No secondary paper feed. | Check if the surfaces of the upper and lower registration rollers are dirty with paper powder. | Clean with isopropyl alcohol. |
| Defective registration clutch installation. | Check visually and remedy if necessary. | |
| (3) Skewed paper feed. | Paper width guide in a cassette installed incorrectly. | Check the paper width guide visually and correct or replace if necessary. |
| (4) Multiple sheets of paper are fed at one time. | Check if the separator pad or MPF separation pad is worn. | Replace the separator pad if it is worn. |
| Check if the paper is curled. | Replace the paper. | |
| (5) Paper jams. | Check if the paper is excessively curled. | Replace the paper. |
| Check if the contact between the upper and lower registration rollers is correct. | Check visually and remedy if necessary. | |
| Check if the heat roller or press roller is extremely dirty or deformed. | Replace the fuser unit | |
| Check if the contact between the ejection roller and fuser ejection pulley is correct. | Check visually and remedy if necessary. | |
| (6) Toner drops on the paper conveying path. | Check if the drum unit or developing unit is extremely dirty. | Clean the drum unit or developing unit |
| (7) Abnormal noise is heard. | Check if the pulleys, rollers and gears operate smoothly. | Grease the bearings and gears. |
| Check if the following electromagnetic clutches are installed correctly: Paper feed clutch, registration clutch and developing clutch. |
Check visually and remedy if necessary. |