| Section |
No. |
Content of maintenance item |
Outline |
| Opera- tion sec- tion Support equip- ment |
U201 |
Initialize Touch Panel (Message: Init Touch Panel) |
Correction of the detection position of the touch panel |
| U203 |
Check DP Operation (Message: Chk DP Ope) |
Checking the DP paper conveying operation on DP simple substance |
| U222 |
Set IC Card Type (Message: Set IC Card Type) |
Setting the IC card type |
| Mode set- ting |
U250 |
Change Maintenance Counter Pre-set (Message: Mnt Cnt Pre- set) |
Changing the preset value |
| U251 |
Check/Clear Maintenance Coun- ter (Message: Clr Mnt Cnt) |
Display of the maintenance counts and chang- ing/clearing |
| U252 |
Set Destination (Message: Set Dest) |
Setting the operation and screen of the machine according to the destination |
| U253 |
Set Double/Single Count (Mes- sage: Set D/S Count) |
Setting the count methods by color mode |
| U260 |
Select Copy Count (Message: Set Count Mode) |
Setting the count timing |
| U285 |
Set Service Status Page (Mes- sage: Set Svc Sts Page) |
Setting the print coverage report output |
| U332 |
Adjust Coverage Size (Message: Adj Calc Rate) |
Adjust Coverage Size (Message: Adj Calc Rate) |
| U345 |
Set the maintenance time precau- tion display (Message: Set Mnt Time Disp) |
Setting the number of sheets of a check close display till maintenance timing |
| U346 |
Selecting Sleep Mode (Message: Slct Sleep Mode) |
Setting the sleep mode of BAM related |
| Image process- ing |
U402 |
Print Margin (Message: Print Mar- gin) |
Adjusting the margin of a leading edge, left edge, right edge and a trailing edge when writ- ing |
| U403 |
Scan Margin Tbl (Message: Scan Margin Tbl) |
Adjusting the margin of the reading data by pic- ture reading of table scanning |
| U404 |
Scan Margin DP (Message: Scan Margin DP) |
Adjusting the margin of the reading data by pic- ture reading of table scanning |
| U407 |
Adjusting the writing timing (Duplex/Reversal) |
Adjusting the writing timing when duplex printing |
| U410 |
Adjusting the halftone automati- cally |
Acquisition of data for automatic adjustment of the halftone and the ID correction |
| U411 |
Auto Adj Scn (Message: Auto Adj Scn) |
Adjusting the scanner and DP automatically |
| U425 |
Set Target (Message: Set Target) |
Inputting the Lab value printed on an adjustment original |
| Network |
U520 |
Set TDRS (Message: Set TDRS) |
Performing TDRS settings and information views |