| Section |
Item No. |
Content of maintenance item |
Initial setting |
| Fax |
U631 |
Setting communication control 2 |
|
| Setting ECM transmission |
On |
| Setting ECM reception |
On |
| Setting the frequency of the CED signal |
2100 |
| U632 |
Setting communication control 3 |
|
| Setting the DIS signal to 4 bytes |
Off |
| Setting the CNG detection times in the fax/telephone auto select mode |
2Time |
| U633 |
Setting communication control 4 |
|
| Enabling/disabling V.34 communication |
On |
| Setting the number of times of DIS signal reception |
On |
| Setting the number of times of DIS signal reception |
Once |
| Setting the reference for RTN signal output |
15% |
| U640 |
Setting communication time 1 |
|
| Setting the one-shot detection time for remote switching |
7 |
| Setting the continuous detection time for remote switching |
80 |
| U641 |
Setting communication time 2 |
|
| Setting the T0 time-out time |
56 |
| Setting the T1 time-out time |
36 |
| Setting the T2 time-out time |
69 |
| Setting the Ta time-out time |
30 |
| Setting the Tb1 time-out time |
20 |
| Setting the Tb2 time-out time |
80 |
| Setting the Tc time-out time |
60 |
| Setting the Td time-out time |
9 (120 V) |
| 6 (220-240 V) |
| U650 |
Setting modem 1 |
|
| Setting the G3 transmission cable equalizer |
0dB |
| Setting the G3 reception cable equalizer |
0dB |
| Setting the modem detection level |
-43dBm |
| U651 |
Setting modem 2 |
|
| Modem output level |
9 (120 V) |
| 10 (220-240 V) |
| DTMF output level (main value) |
5 (120 V) |
| 10.5 (220-240 V) |
| DTMF output level (level difference) |
2 (120 V) |
| 2.5 (220-240 V) |
| U660 |
Setting the NCU |
|
| Setting the connection to PBX/PSTN |
PSTN |
| Setting PSTN dial tone detection |
On |
| Setting busy tone detection |
On |
| Setting for a PBX |
Loop |
| Setting the loop current detection before dialing |
On |
| U670 |
Outputting lists |
|
| U695 |
FAX function customize |
On/Off |
| U699 |
Setting the software switches |
|
| Others |
U910 |
Clearing the print coverage data |
|
| U917 |
Setting backup data reading/writing |
|
| U920 |
Checking the copy counts |
|
| U927 |
Clearing the all copy counts and machine life counts (one time only) |
|
| U928 |
Checking machine life counts |
|
| U977 |
Data capture mode |
|
| U995 |
Memory data Individual setting |
|