-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Kyocera ECOSYS M6526cidn
Maintenance Mode. Modes List: U000 - U346
| Section |
Item No. |
Content of maintenance item |
Initial setting |
| General |
U000 |
Outputting an own-status report |
- |
| U001 |
Exit Maintenance Mode |
- |
| U002 |
Setting the factory default data |
- |
| U004 |
Setting the machine number |
- |
| U010 |
Set Mainte ID |
- |
| U019 |
Firmware Version |
- |
| Initialization |
U021 |
Memory initializing |
- |
| Drive, paper feed and paper conveying system Optical |
U034 |
Adjust Paper Timing Data |
|
| LSU Out Top |
600/0/0/0 |
| LSU Out Left |
600/0/0/0/0/0 |
| U065 |
Adjust Scanner Motor Speed |
0/0 |
| U066 |
Adjust Table Leading Edge Timing |
0/0 |
| U067 |
Adjust Table Center |
0/0 |
| U068 |
Adjust DP Scan Position |
0/0 |
| U070 |
Adjust DP Motor Speed |
0 |
| U071 |
Adjust DP Leading Edge Timing |
0/0/0/0/0 |
| U072 |
Adjust DP Original Center |
0/12/0 |
| Operation panel and support equipment |
U203 |
Checking DP operation |
- |
| U222 |
Setting the IC card type |
Other |
| Mode setting |
U250 |
Setting the maintenance cycle |
200000 |
| U251 |
Checking/clearing the maintenance count |
0 |
| U252 |
Setting the destination |
- |
| U253 |
Switching between double and single counts |
Double count |
| U260 |
Selecting the timing for copy counting |
Eject |
| U285 |
Setting service status page |
On |
| U332 |
Setting the size conversion factor |
1.0 /0/1.0/2.5 |
| U345 |
Setting the value for maintenance due indication |
0 |
| U346 |
Selecting Sleep Mode |
On/On |