Kyocera ECOSYS M6235cidn
Troubleshooting. Jam Code: J0110 - J0213
J0110/J0111: Cover open detection
J0110: Rear cover 1 open (Interlock switch)
J0111: Inner tray open (Tray switch)
The cover-open is detected during print.
| Step | Check description | Assumed cause | Measures |
|---|---|---|---|
| 1 | Opening/closing the cover | The covers are not fitted. | Check if the cover is securely closed, and then repair or replace it when the cover is deformed. |
| 2 | Replacing the cover-open detection switch | The cover-open detection switch is faulty. | Replace the cover-open detection switch. |
J0211/J0212/J0213: PF rear cover open detection
Target: paper feeder (1 to 3)
J0211: Rear cover 2 open
J0212: Rear cover 3 open
J0213: Rear cover 4 open
(PF rear cover switch)
The cover-open is detected during print.
| Step | Check description | Assumed cause | Measures |
|---|---|---|---|
| 1 | Opening/closing the cover | The covers are not fitted. | Check if the cover is securely closed, and then repair or replace it when the cover is deformed. |
| 2 | Checking the PF rear cover switch | The connector of the PF rear cover switch does not connect properly. Or, the PF rear cover switch is come off. | Re-insert the connector of the PF rear cover switch. If the PF rear cover switch is disconnected, reattach it. |
| 3 | Replacing the PF rear cover switch | The PF rear cover switch is faulty. | Replace the PF rear cover switch. |