| Section |
No. |
Content of maintenance |
Outline |
| FAX |
U600 |
Initialize: All Data |
Initialize all data and image memory. |
| U601 |
Initialize: Keep Data |
Initializing the software switches of other than the machine data |
| U603 |
User Data 1 |
Makes user settings to enable the use as a FAX |
| U604 |
User Data 2 |
Makes user settings to enable the use as a FAX |
| U605 |
Clear Data |
Initializing all the data regarding the FAX com- munication |
| U610 |
System 1 |
Setting the number of lines to ignore at 100% magnification and automatic reduction |
| U611 |
System 2 |
Setting the number of adjustment lines for auto- matic reduction |
| U612 |
System 3 |
Setting regarding the FAX communication oper- ation |
| U620 |
FAX System |
Setting the remote change mode |
| U625 |
Set Communication |
Set the interval of a redial and the number of times |
| U630 |
Communication control 1 |
Setting regarding the FAX communication |
| U631 |
Communication Control 2 |
Setting regarding the FAX communication |
| U632 |
Communication Control 3 |
Setting regarding the FAX communication |
| U633 |
Communication Control 4 |
Setting regarding the FAX communication |
| U634 |
Communication Control 5 |
Set the TCF judgment standard |
| U640 |
Communication Time 1 |
Setting the detection time by remote switching mode |
| U641 |
Communication Time 2 |
Set the timeout time for the FAX communication |
| U650 |
Modem 1 |
Set the G3 cable equalizer |
| U651 |
Modem 2 |
Set the modem output level |
| U660 |
Ring setting |
Set NCU (network control unit) |
| U670 |
Output List |
Output the list of the data regarding the fax com- munication |
| U695 |
Fax function customization |
Set On/Off the FAX batch transmission |
| U699 |
Set: Soft SW |
Set the individual software switches on the FAX PWB |
| Others |
U901 |
Clearing the counters by paper source |
Displays/clears the counters by paper source |
| U903 |
Clearing the jam counter |
Displays/clears number of occurrence by jam trigger code |
| U904 |
Clearing the service call error counter |
Displays/clears the service call error and system error counts |
| U905 |
Optional counter |
Displays the counts |
| U908 |
Total counter |
Displays the total counts |
| U910 |
Black rate data |
Clearing the print coverage data and its period |
| Others |
U911 |
Counter by media type |
Displays the counts by media type |
| U917 |
Read/Write Backup Data |
Reading/writing of backup data to USB Flash Drive |
| U920 |
Billing counter |
Display and clear the billing counts |
| U927 |
Clearing all the billing/life counters |
Clear the billing counts and machine life counts |
| U928 |
Machine life counter |
Display the machine life counts |
| U930 |
Checking/clearing the main charger roller count |
Display and set the main charger roller counts |
| U977 |
Setting the data capture mode |
Store the data sent to the MFP into a USB Flash Drive |
| U984 |
Developer unit number |
Displays the developer unit number |
| U991 |
Scanner counter |
Displays the scanner count |