Section |
No. |
Content of maintenance |
Outline |
Fuser section |
U167 |
Clearing the fuser count |
Display of the maintenance counts and check- ing/clearing |
U198 |
Fuser phase control setting |
Flicker countermeasure setting |
Opera- tion sec- tion Support equip- ment |
U201 |
Initialize Touch Panel |
Correction of the detection position of the touch panel |
U203 |
Check DP Operation |
Checking the DP paper conveying operation on DP simple substance |
U222 |
Set IC Card Type |
Setting the IC card type |
Mode set- ting |
U250 |
Change Maintenance Count Preset |
Changing the preset value |
U251 |
Clear/Check the maintenance counter |
Display of the maintenance counts and chang- ing/clearing |
U252 |
Set Destination |
Setting the operation and screen of the machine according to the destination |
U253 |
Set Double/Single Count |
Setting the count methods by color mode |
U260 |
Feed/eject counter switch |
Setting the count timing |
Mode set- ting |
U278 |
Delivery date setting |
Register delivery date |
U283 |
Setting China Red |
Enable/Disable China Red setting |
U285 |
Set Service Status Page |
Setting the print coverage report output |
U287 |
Automatic recovery function |
Set whether to automatically recover after error |
U290 |
Set Application storage drive |
Setting the HyPAS application storage drive |
U326 |
Black line cleaning indication |
Switch the black line cleaning guidance display |
U332 |
Adjust Coverage Size |
Adjust Coverage Size (Message: Adj Calc Rate) |
U345 |
Set the maintenance time precaution display |
Setting the number of sheets of a check close display till maintenance timing |
U346 |
Selecting Sleep Mode |
Setting the sleep mode of BAM related |
Image process- ing |
U402 |
Print margin adjustment |
Adjusting the margin of a leading edge, left edge, right edge and a trailing edge when writ- ing |
U403 |
Scanning margin adjustment (table) |
Adjusting the margin of the reading data by pic- ture reading of table scanning |
U404 |
Scanning margin adjustment (DP) |
Adjusting the margin of the reading data by pic- ture reading of table scanning |
U407 |
Adjusting the writing timing (Duplex/ Reversal) |
Adjusting the writing timing when duplex printing |
U411 |
Scanner auto adjustment |
Adjusting the scanner and DP automatically |
U425 |
Target adjustment |
Inputting the Lab value printed on an adjustment original |
Network |
U520 |
Set TDRS |
Performing TDRS settings and information views |