Kyocera ECOSYS M6026cidn
Maintenance Mode. Modes List: U402 - U630
| Section | Item No. | Content of maintenance item | Initial setting |
|---|---|---|---|
| Image processing | U402 | Adjust Print Margin | 4.0/4.0/4.0/4.0 |
| U403 | Adjust Scanning Margin(Table) | 2.0/2.0/2.0/2.0 | |
| U404 | Adjust Scanning Margin(DP) | 3.0/2.5/3.0/4.0 | |
| U410 | Adjusting the halftone automatically | - | |
| U411 | Auto Adj Scn | - | |
| U425 | Set Target | - | |
| Fax | U600 | Initializing all data | - |
| U601 | Initializing permanent data | - | |
| U603 | Setting user data 1 | DTMF | |
| U604 | Setting user data 2 | 2 (120 V) 1 (220-240 V) |
|
| U605 | Clearing data | - | |
| U610 | Setting system 1 | ||
| Setting the number of lines to be ignored when receiving afax at 100% magnification | 3 | ||
| Setting the number of lines to be ignored when receiving afax in the auto reduction mode | 0 | ||
| Setting the number of lines to be ignored when receiving afax (A4R/LetterR) in the auto reduction mode | 0 | ||
| U611 | Setting system 2 | ||
| Setting the number of adjustment lines for automatic reduction | 7 | ||
| Setting the number of adjustment lines for automatic reduc-tion when A4 paper is set | 22 | ||
| Setting the number of adjustment lines for automatic reduc-tion when letter size paper is set | 26 | ||
| U612 | Setting system 3 Selecting if auto reduction in the auxiliary direction is to be performed |
||
| On | |||
| Setting the automatic printing of the protocol list | Off | ||
| Setting how trailing edge margins are detected | On | ||
| U620 | Setting the remote switching mode | One | |
| U625 | Setting the transmission system 1 | ||
| Setting the auto redialing interval | 3 (120 V) | ||
| 2 (220-240 V) | |||
| Setting the number of times of auto redialing | 2 (120 V) | ||
| 3 (220-240 V) | |||
| U630 | Setting communication control 1 | ||
| Setting the communication starting speed | 14400bps/V17 | ||
| Setting the reception speed | 14400bps | ||
| Setting the waiting period to prevent echo problems at the sender | 300 | ||
| Setting the waiting period to prevent echo problems at the receiver | 75 |