Kyocera ECOSYS M3550idn
Troubleshooting. Jam Codes: 0000 - 0509
*: Refer to figure for paper misfeed indication
| Code | Contents | Conditions | Jam location* |
|---|---|---|---|
| 0000 | Initial jam | The power is turned on when a sensor in the con- veying system is on. | - |
| 0100 | Secondary feeding timeout | Secondary paper feed request given by the con- troller is unreachable. | H |
| 0101 | Wait for ready of print-process package | Process package won’t become ready. | H |
| 0104 | Wait for ready of conveying package | Conveying package won’t become ready. | H |
| 0105 | Driving prevention | A drive does not stop. | H |
| 0106 | Paper feeding request for duplex printing time out | Paper feeding request for duplex printing given by the controller is unreachable. | I |
| 0107 | Wait for ready of fuser pack- age | Fuser package won’t become ready. | H |
| 0110 | Rear cover open | The rear cover is opened during printing. | - |
| 0111 | Top cover open | The top cover is opened during printing. | - |
| 0120 | Receiving a duplex paper feeding request while paper is empty | Paper feed request was received from the duplex section despite the absence of paper in the duplex section. | I |
| 0121 | Exceeding number of duplex pages circulated | The controller issued the duplex section a request for more pages than the duplex print cycle con- tains. | I |
| 0501 | No paper feed of jam | The registration sensor 1 (RS1)*1 or sensor 3 (RS3)*2 does not turn on during paper feed from cassette 1. | 1 |
| 0502 | PF feed sensor 1 (PFFS1) does not turn on dur- ing paper feed from cassette 2. | 2 | |
| 0503 | PF feed sensor 2 (PFFS2) does not turn on dur- ing paper feed from cassette 3. | 3 | |
| 0504 | PF feed sensor 3 (PFFS3) does not turn on dur- ing paper feed from cassette 4. | 4 | |
| 0505 | PF feed sensor 4 (PFFS4) does not turn on dur- ing paper feed from cassette 5. | 5 | |
| 0508 | The registration sensor 1 (RS1)*1 or sensor 3 (RS3)*2 does not turn on during paper feed from duplex section. | I | |
| 0509 | The registration sensor 1 (RS1)*1 or sensor 3 (RS3)*2 does not turn on during paper feed from MP tray. | B |