| Code |
Contents |
Conditions |
Jam location* |
| 4401 |
Duplex sensor 2 non arrival jam |
The duplex sensor 2 does not turn on during paper feed from cassette 1. |
C |
| 4402 |
The duplex sensor 2 does not turn on during paper feed from cassette 2. |
C |
| 4403 |
The duplex sensor 2 does not turn on during paper feed from cassette 3. |
C |
| 4404 |
The duplex sensor 2 does not turn on during paper feed from cassette 4. |
C |
| 4405 |
The duplex sensor 2 does not turn on during paper feed from cassette 5. |
C |
| 4409 |
The duplex sensor 2 does not turn on during paper feed from MP tray. |
C |
| 4418 |
Duplex sensor 2 stay jam |
The duplex sensor 2 does not turn off during paper feed from duplex section. |
C |
| 9000 |
DP original timing sensor ON undetected |
DP feed sensor does not turn on within specified time during the first sheet feeding (Retry 5 times). |
F |
| 9001 |
DP small size original jam |
Right after the DP timing sensor turned on, the DP tim- ing sensor turned off. |
F |
| 9002 |
Jam detected when starting the original conveying |
The unspecified DP conveying sensor turns on when starting conveying. |
F |
| 9010 |
DP unit open |
Document processor is opened during original feed- ing. |
F |
| 9030 |
DP multi feed detection JAM |
Multiple feed of document was detected during docu- ment feed. No display of JAM number on the panel. |
F |
| 9031 |
Multi feed detection sensor error JAM |
At the start of document conveyance, the multi feed detection sensor detected the presence of paper. No display of JAM number on the panel. |
F |
| 9060 |
The DP feed motor keep turning timeout |
When it does not stop even passing the jam timer time after driving the DP feed motor. |
|
| 9061 |
The DP conveying motor keep turning timeout |
When it does not stop even passing the jam timer time after driving the DP conveying motor. |
|
| 9110 |
DP registration OFF undetected |
DP registration does not turn off within specified time of DP registration sensor turning on. |
F |
| 9300 |
DP backside timing sensor non- arrival jam |
The DP back side timing sensor does not turn on even a certain pulse has passed after the DP original sensor turns on. |
F |
| 9310 |
DP backside timing sensor stay jam |
The DP back side timing sensor does not turn off even a certain pulse has passed after the DP original sensor turns off. |
F |
| 9400 |
DP timing sensor non-arrival jam |
The DP timing sensor does not turn on even a certain pulse has passed after the DP original sensor or the DP registration sensor turns on. |
F |
| 9410 |
DP timing sensor stay jam |
The DP timing sensor does not turn off even a certain pulse has passed after the DP original sensor or the DP registration sensor turns off. |
F |
| 9600 |
DP exit sensor non-arrival jam |
The DP exit sensor does not turn on after passing the specific pulse since the DP timing sensor turned on. |
F |
| 9610 |
DP exit sensor stay jam |
The DP exit sensor does not turn off after passing the specific pulse since the DP timing sensor turned off. |
F |