| Code |
Contents |
Conditions |
Jam location* |
| 0000 |
Initial jam |
The power is turned on when a sensor in the convey- ing system is on. |
- |
| 0100 |
Secondary feeding timeout |
Secondary paper feed request given by the controller is unreachable. |
D |
| 0101 |
Wait for ready of print-process package |
Process package won’t become ready. |
D |
| 0104 |
Wait for ready of conveying pack- age |
Conveying package won’t become ready. |
D |
| 0105 |
Driving prevention |
A drive does not stop. |
D |
| 0106 |
Paper feeding request for duplex printing time out |
Paper feeding request for duplex printing given by the controller is unreachable. |
C |
| 0107 |
Wait for ready of fuser package |
Fuser package won’t become ready. |
D |
| 0110 |
Rear cover open |
The rear cover is opened during printing. |
- |
| 0111 |
Top cover open |
The top cover is opened during printing. |
- |
| 0120 |
Receiving a duplex paper feeding request while paper is empty |
Paper feed request was received from the duplex sec- tion despite the absence of paper in the duplex sec- tion. |
C |
| 0121 |
Exceeding number of duplex pages circulated |
The controller issued the duplex section a request for more pages than the duplex print cycle contains. |
C |
| 0501 |
No paper feed jam |
The registration sensor 1 or sensor 3 does not turn on during paper feed from cassette 1. |
B-1 |
| 0502 |
PF conveying sensor 1 does not turn on during paper feed from cassette 2. |
B-2 |
| 0503 |
PF conveying sensor2 does not turn on during paper feed from cassette 3. |
B-3 |
| 0504 |
PF conveying sensor 3 does not turn on during paper feed from cassette 4. |
B-4 |
| 0505 |
PF conveying sensor 4 does not turn on during paper feed from cassette 5. |
B-5 |
| 0508 |
The registration sensor 1 or sensor 3 does not turn on during paper feed from duplex section. |
C |
| 0509 |
The registration sensor 1 or sensor 3 does not turn on during paper feed from MP tray. |
A |