| Section |
No. |
Maintenance item |
Outline |
| FAX |
U612 |
System 3 |
Setting regarding the FAX communication oper- ation |
| U620 |
FAX system |
Sets the signal detection method for remote switching |
| U625 |
Communication settings |
Sets the auto redialing interval and the number of times of auto redialing |
| U630 |
Communication control procedures 1 |
Setting the FAX communication |
| U631 |
Communication control procedures 2 |
Sets the FAX communication |
| U632 |
Communication control procedures 3 |
Setting the FAX communication |
| U633 |
Communication control procedures 4 |
Setting the FAX communication |
| U634 |
Communication control procedures 5 |
Set the acceptable error when judging the received TCF signal |
| U640 |
Communication time setting 1 |
Setting the detection time by remote switching mode |
| U641 |
Communication time setting 2 |
Sets the time-out time for the fax communication |
| U650 |
Modem 1 |
Sets the G3 transmission cable equalizer |
| U651 |
Modem 2 |
Sets the modem output level |
| U660 |
Ring setting |
Setting the NCU (network control unit) |
| U670 |
List output |
Outputting the list of the fax communication data |
| U695 |
FAX function customization |
FAX batch transmission is set up. |
| U699 |
Software switch: Set |
Sets the software switches individually |
| Others |
U910 |
Black rate data |
Clearing the print coverage data and its period |
| U917 |
Read/Write Backup Data |
Reading/writing the backup data to a USB mem- ory |
| U920 |
Billing counter |
Displays the billing count |
| Others |
U927 |
Clearing all the billing/life counters |
Clearing the billing count and machine life count |
| U928 |
Machine life counter |
Displays the machine life count |
| U964 |
Log check |
Transfer the log files to a USB memory |
| U977 |
Setting the data capture mode |
Stores the data sent to the main unit into a USB memory |