| Section |
No. |
Maintenance item |
Outline |
| Mode Setting |
U250 |
Changing the preset maintenance counter value |
Display or set the maintenance counter preset value. |
| U251 |
Clearing/checking the maintenance counter |
Display, set or clear the maintenance counter. |
| U252 |
Destination |
Sets the machine operation and indication depending on the specification of the destination |
| U253 |
Switching the double/single counts |
Sets the counter by color mode |
| U260 |
Select Copy Count |
Setting the count-up timing |
| U285 |
Set Service Status Page |
Setting the print coverage report output |
| U287 |
Set Auto Reset Function |
Enable/disable the auto recovery after error |
| U290 |
Setting the drive to save the HyPAS application |
Sets the drive to save the HyPAS application |
| U332 |
Adjusting the black coverage coeffi- cient |
Setting the coefficient of the custom size |
| Mode Setting |
U345 |
Set Service Status Page |
Setting the counter to display close to time for maintenance |
| U346 |
Selecting Sleep Mode |
Setting the BAM related sleep mode |
| Image process- ing |
U402 |
Adjusting the printing margins |
Adjusts the scan image margins |
| U403 |
Adjusting margins for scanning an original on the contact glass |
Adjusts the margin for scanning originals |
| U404 |
Adjusting margins for scanning an original from the document proces- sor |
Adjusts the margin for scanning originals |
| Image process- ing |
U407 |
Adjusting the writing timing (Duplex/ Reversal) |
Adjusting the writing timing when duplex printing |
| U411 |
Scanner auto adjustment |
Adjusting the scanner and DP automatically |
| U425 |
Set Target |
Inputs the Lab value printed on an adjustment original |
| U520 |
TDRS setting |
Checking/setting the TDRS |
| FAX |
U600 |
Initialize: All Data |
Initializes all data and image memory. |
| U601 |
Initialize: Keep data |
Initializing the software switches of other than the machine data |
| U603 |
User data 1 |
Makes user settings to enable the use as a FAX |
| U604 |
User data 2 |
Makes user settings to enable the use as a FAX |
| U605 |
Data clear |
Initializing the FAX communication data |
| U610 |
System 1 |
Set the number of lines to be ignored when receiving a FAX at 100% magnification and in the auto reduction mode. |
| U611 |
System 2 |
Number of adjustment lines for automatic reduc- tion. |