Kyocera ECOSYS M2530dn
Troubleshooting. Jam Codes: 4301 - 9410
*: Refer to figure for paper jam location
| Code | Contents | Conditions | Jam location* |
|---|---|---|---|
| 4301 | Duplex sensor non arrival jam | The eject sensor (ES) does not turn on after a switchback start, during paper feed from cassette 1. | G |
| 4302 | The eject sensor (ES) does not turn on after a switchback start, during paper feed from cassette 2. | G | |
| 4303 | The eject sensor (ES) does not turn on after a switchback start, during paper feed from cassette 3. | G | |
| 4309 | The eject sensor (ES) does not turn on after a switchback start, during paper feed from the MP tray. | G | |
| 4311 | Duplex sensor stay jam | The eject sensor (ES) does not turn off after a switchback start, during paper feed from cassette 1. | F |
| 4312 | The eject sensor (ES) does not turn off after a switchback start, during paper feed from cassette 2. | F | |
| 4313 | The eject sensor (ES) does not turn off after a switchback start, during paper feed from cassette 3. | F | |
| 4319 | The duplex sensor (DUS) does not turn off after a switchback start, during paper feed from the MP tray. | F | |
| 9000 | No paper feed from DP | DP timing sensor (DPTS) does not turn on during original feed from DP (Retry 5 times). | H |
| 9001 | DP original conveying jam | DP timing sensor (DPTS) turns off within the speci- fied time since the sensor turns on. | H |
| 9003 | DP original switchback jam | During duplex switchback scanning, the DP timing sensor (DPTS) does not turn off within specified time. | H |
| 9004 | During duplex switchback scanning, the DP timing sensor (DPTS) does not turn on within specified time since original switchback operation starts. | H | |
| 9011 | DP top cover open | The DP top cover is opened during original feed- ing. | H |
| 9410 | DP timing sensor stay jam | The DP timing sensor (DPTS) does not turned off within the specified time its turning on. | H |