Kyocera ECOSYS M2530dn
Troubleshooting. Jam Codes: 4012 - 4220
*: Refer to figure for paper jam location
Code | Contents | Conditions | Jam location* |
---|---|---|---|
4012 | Registration sensor stay jam | The registration sensor (RS) does not turn off dur- ing paper feed from cassette 2. | E |
4013 | The registration sensor (RS) does not turn off dur- ing paper feed from cassette 3. | E | |
4020 | When a power supply is turned on, the registration sensor (RS) does not turn off. | E | |
4201 | Eject sensor non arrival jam | The eject sensor (ES) does not turn on during paper feed from cassette 1. | E |
4202 | The eject sensor (ES) does not turn on during paper feed from cassette 2. | E | |
4203 | The eject sensor (ES) does not turn on during paper feed from cassette 3. | E | |
4208 | The eject sensor (ES) does not turn on during paper feed from duplex section. | E | |
4209 | The eject sensor (ES) does not turn on during paper feed from MP tray. | E | |
4211 | Eject sensor stay jam | The eject sensor (ES) does not turn off during paper feed from cassette 1. | G |
4212 | The eject sensor (ES) does not turn off during paper feed from cassette 2. | G | |
4213 | The eject sensor (ES) does not turn off during paper feed from cassette 3. | G | |
4218 | The eject sensor (ES) does not turn off during paper feed from the duplex section. | G | |
4219 | The eject sensor (ES) does not turn off during paper feed from the MP tray. | G | |
4220 | Paper remains at the eject sensor (ES) when power is turned on. | G |