Kyocera ECOSYS M2030dn
Maintenance Mode. Modes List: U620 - U650
| Section | Item No. | Content of maintenance item | Initial setting |
|---|---|---|---|
| Fax | U620 | Setting the remote switching mode | ONE |
| U625 | Setting the transmission system 1 | ||
| Setting the auto redialing interval | 3 (120 V) 2 (220-240 V) |
||
| Setting the number of times of auto redialing | 2 (120 V) 3 (220-240 V) |
||
| U630 | Setting communication control 1 | ||
| Setting the communication starting speed | 14400bps/V17 | ||
| Setting the reception speed | 14400bps | ||
| Setting the waiting period to prevent echo problems at the sender | 300 | ||
| Setting the waiting period to prevent echo problems at the receiver | 75 | ||
| U631 | Setting communication control 2 | ||
| Setting ECM transmission | ON | ||
| Setting ECM reception | ON | ||
| Setting the frequency of the CED signal | 2100 | ||
| U632 | Setting communication control 3 | ||
| Setting the DIS signal to 4 bytes | OFF | ||
| Setting the short protocol transmission | ON | ||
| Setting the reception of a short protocol transmission | ON | ||
| Setting the CNG detection times in the fax/telephone auto select mode | 2TIME | ||
| U633 | Setting communication control 4 | ||
| Enabling/disabling V.34 communication | ON | ||
| Setting the V.34 symbol speed (3429 Hz) | ON | ||
| Setting the number of times of DIS signal reception | ONCE | ||
| Setting the reference for RTN signal output | 15% | ||
| U634 | Setting communication control 5 | 0 | |
| U640 | Setting communication time 1 | ||
| Setting the one-shot detection time for remote switching | 7 | ||
| Setting the continuous detection time for remote switching | 80 | ||
| U641 | Setting communication time 2 | ||
| Setting the T0 time-out time | 56 | ||
| Setting the T1 time-out time | 36 | ||
| Setting the T2 time-out time | 69 | ||
| Setting the Ta time-out time | 30 | ||
| Setting the Tb1 time-out time | 20 | ||
| Setting the Tb2 time-out time | 80 | ||
| Setting the Tc time-out time | 60 | ||
| Setting the Td time-out time | 9 (120 V) 6 (220-240 V) |
||
| U650 | Setting modem 1 | ||
| Setting the G3 transmission cable equalizer | 0dB | ||
| Setting the G3 reception cable equalizer | 0dB | ||
| Setting the modem detection level | 43dBm |